Seat Concepts Comfort Foam & Cover Kit BMW F650GS/G650GS Single Cylinder

Available as a Foam and Cover Kit for the OEM pan - it does not include the seat pan.

INSTALLATION: This kit requires installation onto your existing OEM seat pan. Please review the installation guide and video before starting.

Model-specific design: Seat Concepts builds up the front and slightly dishes the rear to level the rider seating area and reduce the tendency to slide towards the tank.

Fitment: For the single-cylinder F650GS and G650GS models listed in the Fitment tab, including Dakar and Sertao. Does not fit the later F650GS twin-cylinder models or the earlier F650 Funduro/ST.

Length: Same as OEM for all options.

Seat Concepts Comfort seats use proprietary foam designed to balance cushioning and support. The Comfort shape keeps a contour similar to the original seat at the front, helping maintain a natural leg position, while widening through the main seating area to distribute rider weight over a larger surface.

This design helps improve comfort on longer commutes, touring and dual-sport rides.

Product images are for reference and may show a different seat height, width or cover option. Please refer to the product details and available options when making your selection.

COVER OPTIONS: Not all cover options are available for all seat height & width options. The available options for each model are limited to those shown in the selection menu on each product page.

Carbon Fiber material refers to a vinyl material with imprinting, making it look like carbon fiber. This material provides minimal grip.

Semi-Grip material has a beaded texture and provides an intermediate level of grip.

Luna is an Italian material designed to match the look and texture of factory KTM and Husqvarna seat covers. It provides moderate grip while allowing the rider to move around the seat with limited restriction.

Gripper material has a sandpaper texture and will provide a fairly aggressive level of grip.

Diamante material is a synthetic, suede like material designed to match the factory synthetic suede that is commonly use on production Street and Adventure motorcycles. This texture provides a soft suede like feel that is highly flexible. The natural conformity of this material gives a moderate level of grip but still allows the rider to move about the seat.

Wire Gripper material (available on the Race 2.0, Element and Hard Adventure 2.0 seats) is a high performance material designed to provide a mechanical gripping characteristic. This texture provides a high level of grip and limits movement on the seat in all conditions.

Vinyl based material (available on the Commuter and Rally seats) is a semi-smooth material is common choice as an accent for the Comfort line of seats. This texture provides low grip and allows unrestricted movement for the rider.

CHANGES & CANCELLATIONS: These seats are custom made to order. Once your seat enters production, it cannot be changed or cancelled, including when production takes longer than anticipated. Lead times are estimates, not guaranteed shipping or delivery dates.

Before production begins, cancellation may be possible but is not guaranteed. If cancellation is possible, a minimum $120 cancellation fee applies.

LEAD TIMES FOR MADE TO ORDER SEATS: This is a made to order item, therefore we provide an estimate of how long it will take to have made in the USA and shipped to our BC warehouse. This estimate is provided by Seat Concepts and subject to change based on factors out of our control. Lead times should not be taken as a guaranteed shipping or delivery date. Contact us BEFORE placing an order if you have any questions.

RETURN/EXCHANGE POLICY: We cannot accept returns or exchanges on custom, made to order seats.

MANUFACTURER WARRANTY: Seat Concepts provides a 1-year product defect warranty to the original purchaser. This does not cover abuse, impact (crash) damage, cross threaded or stripped mounting bolts/inserts, damage done during customer installation or sun-faded colors. Excessive wear or abrasion at the knee area is common to riders who wear knee braces or grip tightly with their knees, and is also not covered under warranty. For warranty claims, we will attempt to verify the issue as best we can with pictures, but in some cases an item must be sent directly to Seat Concepts for a hands on inspection. If the product is found to have a defect, Seat Concepts will, at their discretion, repair or replace the item. MX1 Canada will work with Seat Concepts on your behalf to help resolve any issues, however MX1 Canada is not responsible for shipping fees or other charges related to warranty claims. Proof of purchase will be required before a warranty claim can be opened.