ROX 1-3/4 Inch Pivoting Handlebar Risers for 1-1/8 Inch Handlebar

• 1 3/4" (44.5mm) Center-to-Center Rise
• Pivots backward/forward based on rider preference
• 1 1/8" Stem (28mm)
• Accepts 1 1/8" Handlebar (28mm)
• Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers

Developed around the BMW F800GS ABS model. It barely clears the stock F800GS handlebar clamps and can be pivoted to your desired fore and aft location. Clears KTM clamps as well and is a recommended riser for the 990 Adventure with stock lines.

Has (1) 8mm tap hole in the end of the posts to mount what ever you desire, Ram ball, etc.

Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

THESE RISERS DO NOT WORK ON THE F650GS TWINS because those bikes have 7/8 inch diameter bars.