Doubletake ENDURO Mirror Assembly

The Doubletake Enduro Mirror assembly includes RAM Mount components which are well known for their durability and effectiveness. The RAM Mount joints are stiff enough to hold the mirror at highway speeds but will move if they are hit, protecting you from injury and your bike from damage. If you plan to fold the mirror away, we recommend the Doubletake Enduro because the longer mirror tucks away more tightly. However, if you leave your mirrors primarily extended, we recommend the Doubletake Adventure Mirror Assembly because the shorter mirror offers more stability.

HOW TO ORDER:

1. Select your mirror assembly. Assembly includes 1 Mirror, your choice of either a 2" or 3" RAM Arm AND:
   • Ball Stud Base 10mm x 1.25 thread - fits most mirror perches (all European & Japanese brands except some BMW). Works with split clamp assembly.
   OR
   • BMW Stud Base 10mm x 1.5 thread
2. Exceptions include right side Yamaha - adapter sold separately.

APPLICATIONS:

DIRT BIKES
• Use the Ball Stud Base. For bikes without a mirror mount you will need to purchase the Split Clamp. Split Clamps fit all handlebars and are sold separately.

BMW
• F650/800 twins and R1200GS use BMW Stud Base (10mm x 1.5 thread).
• X Challenge and X country use Ball Stud Base (10mm x 1.25 thread).
• F-GS Singles are inconsistent, even within the same year. Some are 10mm x 1.25, while others are 8mm x 1.25 which requires the 8mm Toughball Base. Please check your bike before ordering.

HONDA, KAWASAKI, KTM, SUZUKI, and TRIUMPH
• Use the Ball Stud Base 10mm x 1.25 which threads into the existing mirror mount. Fits both sides on all models.
• To install, remove the old mirror, thread in the base and use the RAM Arm to tighten. Do not use pliers which will gall the aluminum shaft of the base.

YAMAHA
• Left side Yamaha mirrors are industry standard 10mm x 1.25 thread, so use the Ball Stud Base to mount the mirror.
• Right side Yamaha mirrors are reverse thread. Some bikes (WR250's) include an adapter to work with the Ball Stud Base. If you don't have the adapter you will need to purchase the Yamaha Adapter.

SPECS:

• Indestructible - Made from reinforced Zytel
• Excellent visibility - SAE Spec Convex lens
• Easy to fold, remove or swap between bikes
• Guaranteed against breakage
• Mirror Diameter + 100mm (4")
• Overall length = 215mm (8.5")
• Made in the USA

DETAILS:

Doubletake Mirror's allow you to place the mirror head exactly where you need it. Available in either 2" or 3" arm length. The long arm gives better visibility and folds farther into center. The short arm creates the most compact package. These mirrors can be positioned further out than stock mirror's allowing you to see more of what's behind you. And it's easy to take the mirror off or fold it out of sight on top of the handlebars.

The Doubletake mirror assembly includes RAM Mount components which are well known for their durability and effectiveness. The RAM Mount joints are stiff enough to hold the mirror at highway speeds but will move if they are hit, protecting you from injury and your bike from damage.

Doubletake Mirrors also use an SAE spec convex glass that provides a nicer field of view than a flat lens would, while retaining the ability to focus on the details you need to pay attention to.

The manufacturer (Adventure Mirror, LLC) will warranty the plastic mirror arm for life. The glass lens is NOT INCLUDED in this warranty, but these can be purchased separately. RAM parts are warranted through the manufacturer of RAM mounts (NPI).